+86-755-23894509-816herry@cnzhenya.com

Categories

Jiangsu Zhenya Special Screw Co.,Ltd

Tel: 86-755-23894509

Fax: 86-755-23894519

Atten: henry liu

Email: herry@cnzhenya.com

skype: forcelink.fl

Add: No.8, Yannin Highway, Dainan Town, Xinghua City, Jiangsu, China

Stainless Steel Threaded Rods

Stainless Steel Threaded Rods

Threaded Rod is a continuous length of round bar that has a thread on its external diameter so a nut can be screwed on from either end. Often also referred to as All Thread, Running Thread, Threaded B

Product Details

Threaded Rod is a continuous length of round bar that has a thread on its external diameter so a nut can be screwed on from either end. Often also referred to as All Thread, Running Thread, Threaded Bar or Studding, Stainless Steel Threaded rod is usually Class 50 by default.

Threaded Rods are sometimes confused with threaded studs. The difference is when measured end-to-end, threaded studs are normally found in lengths of 12" or less, while threaded rods are typically between 2 ft. and 12 ft. in length.

Threaded Rod, Low Carbon, Zinc Plated

The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.

38.png


 Dia meter

Nom inal Size

D (Major Diameter)

Max.

Min.

4 -4 0  *

.1 12 0

.111 2

.1 06 1

6 -3 2  *

.1 38 0

.137 2

.1 31 2

8 -3 2  *

.1 64 0

.163 1

.1 57 1

10 -24

*

.1 90 0

.189 0

.1 81 8

10 -32

*

.1 90 0

.189 1

.1 83 1

12 -24

*

.2 16 0

.215 0

.2 07 8

1/4 -20

.2 50 0

.248 9

.2 36 7

1/4 -28

.2 50 0

.249 0

.2 39 2

5/16- 18

.3 12 5

.311 3

.2 98 2

5/16- 24

.3 12 5

.311 4

.3 00 6

3/8 -16

.3 75 0

.373 7

.3 59 5

3/8 -24

.3 75 0

.373 9

.3 63 1

7/16- 14

.4 37 5

.436 1

.4 20 6

7/16- 20

.4 37 5

.436 2

.4 24 0

1/2 -13

.5 00 0

.498 5

.4 82 2

1/2 -20

.5 00 0

.498 7

.4 86 5

9/16- 12

.5 62 5

.560 9

.5 43 7

9/16- 18

.5 62 5

.561 1

.5 48 0

5/8 -11

.6 25 0

.623 3

.6 05 1

5/8 -18

.6 25 0

.623 6

.6 10 5

3/4 -10

.7 50 0

.748 2

.7 28 8

3/4 -16

.7 50 0

.748 5

.7 34 3

7/8- 9

.8 75 0

.873 1

.8 52 3

7/8 -14

.8 75 0

.873 4

.8 57 9

1 -8

1.00 0

.998 0

.9 75 5

1 -1 4  *

1.00 0

.998 4

.9 88 1

1 1/8 -7

1.12 5

1 .1 228

1.0 982

1 1/8- 12

1.12 5

1 .1 232

1.1 060

1 1/4 -7

1.25 0

1 .2 478

1.2 232

1 1/4- 12

1.25 0

1 .2 482

1.2 310

1 3/8 -6

1.37 5

1 .3 726

1.3 453

1 1/2 -6

1.50 0

1 .4 976

1.4 703

1 1/2- 12

1.50 0

1 .4 981

1.4 809

1 3/4 -5

1.75 0

1 .7 473

1.7 165

2- 4.5

2.00 0

1 .9 971

1.9 641

* Class 2A threads shall be used for sizes where 1A is not applicable


Length

Tolerance

3'

+/- 1/4"

6' - 12'

+/- 1/2"

Length shall be measured form end to end


Specification Requirements:

Standard: ASME B18.31.3

•Material &

Mechanical Properties: ASTM A307, Grade A

Thread requirements: Roll threaded to ASME, B1.1 UNC & UNF, and UNS Class 1A.

Coating: Fe/Zn 3AT Per ASTM F1941




Related Products
Inquiry